Spalding M682001 - Manual (Page 10)

10
ID# M682001 12/06
4. Bounce top and middle pole assembly (4 and 5)
onto bottom pole section (6) using a wood scrap as
shown. Bounce until the top and middle pole
assembly no longer moves toward the pole
identification mark on the bottom pole.
4
5
6
RODS SHOWN ARE FOR
VISUAL REPRESENTATION OF
ALIGNMENT AND ARE NOT
SUPPLIED WITH THE
HARDWARE
Align dimple of middle pole section (5) into
trough of bottom pole section (6) as shown.
IMPORTANT!
HOLE
DIMPLE
Bottom pole
1.5” (3.81 cm)
ID STICKER
Bottom pole
5”
(12.7 cm)
Trough
Dimple
Wood Scrap
(not supplied)