Sony 3-294-663-11(2) - Manual

MHC-EC98P/EC78Pi.GB.3-294-663-11(2)
WARNING
To reduce the risk of fire or electric shock,
do not expose this apparatus to rain or
moisture.
To prevent fire, do not cover the ventilation of the
apparatus with news papers, table-cloths, curtains, etc.
And don’t place lighted candles on the apparatus.
To prevent fire or shock hazard, do not place objects filled
with liquids, such as vases, on the apparatus.
Install this system so that the power cord can be
unplugged from the wall socket immediately in the event
of trouble.
Do not install the appliance in a confined space, such
as a bookcase or built-in cabinet.
Batteries or batteries installed apparatus shall not be
exposed to excessive heat such as sunshine, fire or the
like.
Hooking up the system securely
This appliance is classified
as a CLASS 1 LASER
product. This marking
is located on the rear
exterior.
Disposal of Old Electrical & Electronic
Equipment
(Applicable in the European Union and
other European countries with separate
collection systems)
This symbol on the product or on its packaging indicates
that this product shall not be treated as household
waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and
electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product. The recycling of materials
will help to conserve natural resources. For more detailed
information about recycling of this product, please
contact your local Civic Office, your household waste
disposal service or the shop where you purchased the
product.
Disposal of waste batteries (applicable in
the European Union and other European
countries with separate collection
systems)
This symbol on the battery or on the packaging indicates
that the battery provided with this product shall not be
treated as household waste. By ensuring these batteries
are disposed of correctly, you will help prevent potentially
negative consequences for the environment and human
health which could otherwise be caused by inappropriate
waste handling of the battery. The recycling of the
materials will help to conserve natural resources.
In case of products that for safety, performance or data
integrity reasons require a permanent connection with an
incorporated battery, this battery should be replaced by
qualified service staff only. To ensure that the battery will
be treated properly, hand over the product at end-of-life
to the applicable collection point for the recycling of
electrical and electronic equipment.
For all other batteries, please view the section on how
to remove the battery from the product safely. Hand the
battery over to the applicable collection point for the
recycling of waste batteries.
For more detailed information about recycling of this
product or battery, please contact your local Civic Office,
your household waste disposal service or the shop where
you purchased the product.
When carrying this system
1 Remove all discs to protect the CD mechanism.
2 Press FUNCTION +/ (or FUNCTION on the unit) 
repeatedly to select the CD function.
3 Hold down   and   on the unit until
“STANDBY” appears.
4 After “LOCK” appears, unplug the power cord.
Basic Operations Adjusting the sound
To adjust the volume
Press VOLUME +/ (or turn the VOLUME control on
the unit) .
To add a sound effect
To Press
Generate a more dynamic
sound (Dynamic Sound
Generator X-tra)
DSGX  on the unit.
Set the sound effect EQ .
To turn on the subwoofer (MHC-EC98P only)
Press SUBWOOFER ON/OFF  on the unit until
“SUBWOOFER” appears. The volume of the subwoofer is
linked to the front speakers.
Playing a CD/MP3 disc
1 Select the CD function.
Press FUNCTION +/ (or FUNCTION on the unit)
 repeatedly.
2 Place a disc.
Press  (open/close)  on the unit, and place a
disc with the label side up on the disc tray. To place
additional discs, slide the disc tray with your finger as
shown below.
To close the disc tray, press  (open/close)  on the
unit.
Do not force the disc tray closed with your finger, as
this may damage the unit.
3 Select a disc.
If the discs are currently stopped, press DISC SKIP .
To change discs while in other functions, press
DISC 1  3  on the unit.
4 Start playback.
Press  (play) .
To exchange other discs during playback, press
EX-CHANGE  on the unit.
To Press
Pause playback  (pause) . To resume play,
press the button again.
Stop playback  (stop) .
Select a folder on an
MP3 disc
+/ (select folder) .
Select a track or file / (go back/go forward)
(or / on the unit) .
Find a point in a
track or file
Hold down / (rewind/fast
forward)  during playback, and
release the button at the desired
point.
Select Repeat Play REPEAT  repeatedly until
“REP” or “REP1” appears.
To change the play mode
Press PLAY MODE  repeatedly while the player is
stopped. You can select normal play (no display for all
discs or “1 DISC” for a disc or “ ” for all MP3 files
in the folder on the disc), shuffle play (“SHUF” for
all discs shuffle, “1 DISC SHUF” for one disc shuffle
or “ SHUF*” for folder shuffle), or program play
(“PGM”).
* When playing a CD-DA disc, (SHUF) Play performs the same
operation as 1 DISC (SHUF) Play.
Notes on Repeat Play
 All tracks or files on a disc are played repeatedly up to five times.
 You cannot select “REP” and “SHUF” (all discs shuffle) at the same
time.
 “REP1” indicates that a single track or file is repeated until you stop
it.
Notes on playing MP3 discs
 Do not save other types of tracks or files or unnecessary folders on a
disc that has MP3 files.
 Folders that have no MP3 files are skipped.
 MP3 files are played back in the order that they are recorded onto
the disc.
 The system can only play MP3 files that have a file extension of
“.MP3”.
 If there are files on the disc that have the “.MP3” file extension,
but that are not MP3 files, the unit may produce noise or may
malfunction.
 The maximum number of:
 folders is 150 (including the root folder).
 MP3 files is 255.
 MP3 files and folders that can be contained on a single disc is 300.
 folder levels (the tree structure of files) is 8.
 Compatibility with all MP3 encoding/writing software, recording
device, and recording media cannot be guaranteed. Incompatible
MP3 discs may produce noise or interrupted audio or may not play
at all.
Notes on playing multisession discs
 If the disc begins with a CD-DA (or MP3) session, it is recognized
as a CD-DA (or MP3) disc, and playback continues until another
session is encountered.
 A disc with a mixed CD format is recognized as a CD-DA (audio)
disc.
Listening to the radio
1 Select “TUNER FM” or “TUNER AM.”
Press FUNCTION +/ (or FUNCTION on the unit)
 repeatedly.
2 Select the tuning mode.
Press TUNING MODE  repeatedly until “AUTO”
appears.
3 Tune in the desired station.
Press +/ (or TUNING +/ on the unit) .
Scanning stops automatically when a station is tuned
in, and then “TUNED” and “ST” (for stereo programs)
appear.
To stop automatic scanning
Press  (stop) .
To tune in a station with a weak signal
If “TUNED” does not appear and the scanning does
not stop, press TUNING MODE  repeatedly until
“MANUAL” appears, and then press +/ (or TUNING
+/ on the unit)  repeatedly to tune in the desired
station.
To reduce static noise on a weak FM stereo
station
Press FM MODE  repeatedly until “MONO” appears
to turn off stereo reception.
Changing the display
To Press
Change
information on
the display*
DISPLAY  repeatedly when the
system is turned on.
Change Display
mode (See below.)
DISPLAY  repeatedly when the
system is turned off.
* For example, you can view CD/MP3 disc information, such as;
 track or file number during normal play.
 track or file name (“ ”) during normal play.
 artist name (“ ”) during normal play.
 album or folder name (“ ”) during normal play.
 total playing time while the player is stopped.
The system offers the following display modes.
Display mode
When the system is off,
Power Saving
Mode 1)
The display is turned off to conserve
power. The timer and clock continue
to operate.
Clock 2) The clock is displayed.
1) You cannot set the clock in Power Saving Mode.
2) The clock display automatically turns to Power Saving Mode after
eight seconds.
Notes on the display information
 Characters that cannot be displayed appear as “_”.
 The following are not displayed;
 total playing time for an MP3 disc.
 remaining playing time for an MP3 file.
 The following are not displayed correctly;
 elapsed playing time of an MP3 file encoded using VBR (variable
bit rate).
 folder and file names that do not follow either ISO9660 Level 1,
Level 2 or Joliet in the expansion format.
 The following are displayed;
 total playing time for a CD-DA disc when the play mode is
“1 DISC”.
 remaining playing time for a track.
 ID3 tag information for MP3 files when ID3 version 1 and
version 2 tags are used (ID3 version 2 tag information display has
priority when both ID3 version 1 and version 2 tags are used for a
single MP3 file).
 up to 15 characters of ID3 tag information using uppercase letters
(A to Z), numbers (0 to 9), and symbols (‘< > * + , – / @ [ \ ] _).
Notice for the customer in the
countries applying EU Directives
The manufacturer of this product is Sony Corporation,
1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The
Authorized Representative for EMC and product safety is
Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327
Stuttgart, Germany. For any service or guarantee matters
please refer to the addresses given in separate service or
guarantee documents.
Note on DualDiscs
A DualDisc is a two sided disc product which mates
DVD recorded material on one side with digital
audio material on the other side. However, since the
audio material side does not conform to the Compact
Disc (CD) standard, playback on this product is not
guaranteed.
Music discs encoded with copyright
protection technologies
This product is designed to playback discs that conform
to the Compact Disc (CD) standard. Recently, various
music discs encoded with copyright protection
technologies are marketed by some record companies.
Please be aware that among those discs, there are some
that do not conform to the CD standard and may not be
playable by this product.
MPEG Layer-3 audio coding technology and patents
licensed from Fraunhofer IIS and Thomson.
* MHC-EC98P only
This manual mainly explains operations using the
remote, but the same operations can also be performed
using the buttons on the unit having the same or similar
names.
Before using the system
To use the remote
Slide and remove the battery compartment lid , and
insert the two R6 (size AA) batteries (supplied),  side
first, matching the polarities shown below.
Notes on using the remote
 With normal use, the batteries should last for about six months.
 Do not mix an old battery with a new one or mix different types of
batteries.
 If you do not use the remote for a long period of time, remove the
batteries to avoid damage from battery leakage and corrosion.
 Batteries installed devices shall not be exposed to excessive heat such
as sunshine, fire or the like.
To set the clock
1
Turn on the system.
Press  (on/standby)  to turn on the system.
2 Select the clock set mode.
Press TIMER MENU . The hour indication flashes.
If “PLAY SET” flashes, press /  repeatedly to
select “CLOCK,” and then press (enter) .
3 Set the time.
Press /  repeatedly to set the hour, then press
(enter) . The minute indication flashes.
Use the same procedure to set the minutes.
Note
The clock settings are lost when you disconnect the power cord or if a
power failure occurs.
*
Using optional audio components
To connect an optional headphones
Connect headphones to the PHONES jack  on the
unit.
To connect an optional component
Connect additional audio source components to the
AUDIO IN jack  on the unit using an analog audio
cord (not supplied). Turn down the volume on the
system, and then select the AUDIO IN function.
To connect a DIGITAL MEDIA PORT adaptor
Connect the DIGITAL MEDIA PORT adaptor to the
DMPORT  on the unit. You need to connect the
DIGITAL MEDIA PORT adaptor to an optional audio
device (portable audio player, etc.).
Notes on DIGITAL MEDIA PORT adaptor
 Available DIGITAL MEDIA PORT adaptors vary in each area.
 Do not connect an adaptor other than the DIGITAL MEDIA PORT
adaptor.
 Do not connect or disconnect the DIGITAL MEDIA PORT adaptor
to/from the DMPORT  while the system is on.
 When using a DIGITAL MEDIA PORT adaptor that has video
output function, connect the adaptor directly to the TV.
 For details about the DIGITAL MEDIA PORT adaptor, refer to the
operating instructions supplied with your DIGITAL MEDIA PORT
adaptor.
Wall socket
Subwoofer (MHC-EC98P only)
Place the subwoofer vertically to obtain a better bass reproduction.
Also, position the subwoofer:
 on a solid floor where resonance is unlikely to occur.
 at least a few centimeters away from the wall.
 away from the center of the room or place a bookshelf against a
wall, to avoid generating a standing wave.
Speaker pads
Attach the supplied speaker pads to the bottom of the front speakers
and subwoofer to prevent slipping.
Front speakers:
4 pads for each speaker
Subwoofer:
4 pads (MHC-EC98P only)
FM lead antenna (Extend it horizontally.)
AM loop antenna
Speakers
Insert only the
stripped portion
of the cord.
Solid (Blue/)
Solid (Black/)
Subwoofer
(MHC-EC98P only)
Connect the subwoofer
to the SUBWOOFER
jack with the subwoofer
cable.
Left speaker (High freq.)
Solid (Red/)
Solid (Gray/)
Right speaker
(High freq.)
Power
Connect the power cord to a wall socket.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only
for models equipped with an adaptor).
Right speaker
(Low freq.)
Left speaker (Low freq.)
Antennas
Find a location and an orientation that provide good
reception, and then set up the antenna.
Keep the antennas away from the speaker cords and the
power cord to avoid picking up noise.
3-294-663-11(2)
MHC-EC98P/EC78Pi
© 2008 Sony Corporation Printed in China
Mini HI-FI
Component
System
Operating Instructions