Silex technology SX-3700WB - Manual (Page 6)

2-6
Users Manual SX2
PRICOM SX-3700WB
4. Make sure that printer is working and turned on.
- Using an AC adapter other than the one provided with this product can cause damage.
- Wait for 2 or more seconds after connecting/disconnecting the USB cable.
- Do not disconnect the USB cable during printing, scanning or reading/writing from a memory
card.
- After turning on this product or connecting the USB cable, printing will proceed according to
priority.
How to Connect
Connect this product to Printer and Network
- If this product has been used in another network environment, restore to factory default.
This product needs the following to connect to a USB device.
The following example uses a printer as the connected device.
1. Connect the AC Adapter to this product.
2. Plug in the Power cable to the USB
device.
3. Connect this product to a USB device.
This product uses a type A connector
and the USB device will use a type B
connector.
- The USB Cable will have two types of connecters.
- Make sure of the connector type.
USB Cable
A-B Type
Type A Type B
TIP
NOTE
TIP
[ Example ]