Sanyo SCP 4900 - Manual (Page 22)

Section 2B
Controlling Your Phone’s
Settings
In This Section
ᮣ Volume Settings
ᮣ Ringer Types
ᮣ Selecting Tone Length
ᮣ Alert Notification
ᮣ Silent Mode
ᮣ Changing the Greeting
ᮣ Changing the Backlight Settings
ᮣ Changing Display Settings
ᮣ Screen Savers
ᮣ Setting Main Menu Design
ᮣ Changing the Contrast
T his section describes how you can change your phone’s settings to best suit
your requirements. Take a few moments to review these options and add
or adjust the settings that are right for you.
Section 2: Understanding Your Phone
2B: Controlling Your Phone’s Settings 33
Dialing From the Internal Phone Book
1. From the Standby mode, press to display the main menu.
2. Highlight Phone Book and press .
3. Highlight Find Name and press .
ᮣ Press right of the Navigation key for the shortcut (steps 1 through 3).
4. Use your Navigation key to scroll through the Phone Book list and
highlight one of the appropriate entries and press
.
5. Select the box under your desired memory location by scrolling.
6. Press (right softkey) for the menu options.
7. Highlight your desired feature and press .
Using One-Touch Speed Dialing
With this feature, you can dial Speed Dial entries using one key press for
locations 2-9. (See pages 90-91 for storing a speed dial number.)
To use One-Touch Dialing for Speed Dial locations 2-9:
ᮣ Press and hold the appropriate key for few seconds.
The display confirms that the number has been dialed when it shows
“Connecting...”.
Note: Speed dialing is not available when you are roaming with
Call Guard enabled.
Options
Section 2: Understanding Your Phone
32 2A: Your PCS Phone – The Basics