Star Micronics SCP700 User Manual

Page 19

Advertising
background image

15

ENGLISH

❏

Open the printer cover.

❏

If a paper roll is already loaded in the printer, remove it. Pull up the receipt
printer mechanism and swing it to a raised position until it stops.

Important!

Parts of the receipt printer mechanism become very hot during printing. Be
sure to handle it carefully to avoid personal injury.

❏

Press down on the near-end sensor release with a ball point pen or similar
pointed object, and slide the pointer left and right until it is aligned with the
indicator for the sensor position you want to use.

Note:

The above diameters indicate the outside diameter of the entire roll. To ensure
proper operation of the near-end sensor, the cardboard core of the paper roll
should have an inside diameter 0.47

″

(12mm) and an outside diameter of 0.71

″

(18mm).

Sensor Position

Approximate Roll Diameter

1 (Factory Default)

0.87

″

/22mm

2

1.02

″

/26mm

3

1.18

″

/30mm

Advertising