Smeg Built-in Microwave Oven - Manual (Page 8)

10
Instructions for the user
7.3 Description of the controls on the front panel
All the appliance's control and monitoring devices are placed together on
the front panel. The symbols used are described in the table below.
FUNCTIONS AND SYMBOLS SHOWN:
PT1
Functions
Thermostat
Knob
allows you to set the time, select the cooking
temperature and duration and program the
cooking start and end times.
PT2
Functions
ON-OFF
Knob
allows access to the oven's three operating
modes, and is also used to select a cooking
function or cooking program
(see paragraph “7.4 Operating modes”).
DSP1
Display
current
time
Programmed
cooking procedures
This display shows the current time or the
cooking duration.
The following symbols coming on indicate:
Clock: adjusting the cooking time
Bell: minute minder activated.
Delayed start: setting the cooking time with a delayed start.
Cooking duration: setting the cooking time.
Recommended runner:
recommended runner number according to
the selected cooking recipe.
Selectable functions