Sony PCWA-A500 - Manual (Page 21)

21
Setting and connections
Confirming the status of the Access Point
Perform the following steps to confirm the current status of the Access
Point.
1
Follow the steps for Displaying the Access Point setup page
(page 16) to open the Access Point setup page.
2
Click Status.
3
If a guest password has been set, you are requested to
enter a password. Type guest in the User Name text box,
and enter the password, then click OK.
The status of the Access Point is displayed.
z Hints
• The guest password is not set when the Access Point is shipped from the factory.
For details, see “About the Access Point password” (page 18).
• Also, you can display the Access Point Status page using the administrator user
name “admin” and its password.