Maintenance, Ref e renc es – Sharp IM-DR400E User Manual

Page 49

Advertising
background image

49

IM-DR400E

1

2

3

4

5

6

03/7/21 IM-DR400E_6.fm

IM-DR400E TINSE0562AWZZ

Ref

e

renc

es

-T

ro

ub

le

s

hoot

in

g/

M

a

inte

na

nc

e

-

!

If trouble occurs

When this product is subjected to strong external interfer-
ence (mechanical shock, excessive static electricity,
abnormal supply voltage due to lightning, etc.) or if it is
operated incorrectly, it may malfunction.

Should a failure occur, the lid may not open by sliding the
OPEN lever.

If such a problem occurs, do the following:

!

Moisture condensation

When the unit has condensation inside, the disc signals
cannot be read, and the unit may not function properly.

In the following cases, condensation may form inside the
unit.

"

Shortly after turning on a heater.

"

When the unit is placed in a room where there is
excessive steam or moisture.

"

When the unit is moved from a cool place to a warm
place.

To remove condensation:

Remove the MiniDisc and leave the unit for approxi-
mately 1 hour. The condensation should evaporate and
the unit will work properly.

Maintenance

!

Cleaning

When the unit becomes dirty
Clean it with a soft cloth. When the unit is excessively
dirty, use a soft cloth dampened in water (external sur-
faces only).

Clean the plugs and the connecting sockets.
If the plugs or sockets are dirty, noise may be heard.
Cleaning will prevent noise.

Caution:

"

Do not use chemicals for cleaning (petrol, paint thin-
ner, etc.). It may damage the cabinet finish.

"

Do not apply oil to the inside of the unit. It may cause
malfunctions.

1. Unplug the AC adaptor from the wall socket.
2. Remove the battery.
3. Leave the unit completely unpowered for approximately

30 seconds.

4. Plug the AC adaptor back into the wall socket.
5. After about 30 seconds, press the

button as a test.

8

Advertising