SMC Networks SMCWBR 14-GM - Manual (Page 20)

19
the password, keep it empty. Connection ID: optional. Input the connection ID if your ISP
requires it. Maximum Idle Time: the time of no activity to disconnect your PPTP session.
Set it to zero or enable Auto-reconnect to disable this feature. If Auto-reconnect is enabled,
this product will connect to ISP automatically, after system is restarted or connection is
dropped.
Connection Control: There are 3 modes to select:
Connect-on-demand: The device will link up with ISP when the clients send
outgoing packets.
Auto-Reconnect (Always-on): The device will link up with ISP until the
connection is established.
Manually: The device will not make the link until someone clicks the
connect-button in the Status-page.
L2TP: Some ISPs require the use of L2TP to connect to their services
First, please check your ISP assigned and Select Static IP Address or Dynamic IP Address.
For example: Use Static: My IP Address and My Subnet Mask: the private IP address and
subnet mask your ISP assigned to you. Server IP Address: the IP address of the PPTP
server. PPTP Account and Password: the account and password your ISP assigned to you.
If you don't want to change the password, keep it empty. Connection ID: optional. Input
the connection ID if your ISP requires it. Maximum Idle Time: the time of no activity to
disconnect your PPTP session. Set it to zero or enable Auto-reconnect to disable this
feature. If Auto-reconnect is enabled, this product will connect to ISP automatically, after
system is restarted or connection is dropped.
Connection Control: There are 3 modes to select:
Connect-on-demand: The device will link up with ISP when the clients send
outgoing packets.
Auto-Reconnect(Always-on):The device will link up with ISP until the
connection is established.
Manually: The device will not make the link until someone clicks the
connect-button in the Status-page.