Sony HDCU-900 - Manual (Page 21)

1-11 (E)
HDCU-900 MM
D1006, D1007, D1008, D1009, D1010 :
MAIN OUTPUT display
Displays the frame frequency setting of the frame convert
HD output of the CCU.
D1006 lights up when the frequency is 30 Hz.
D1007 lights up when the frequency is 25 Hz.
D1008 lights up when the frequency is 24 Hz.
D1009 lights up when the picture of the HD output is
progressive and the format is PsF (segment progressive).
D1010 lights up when the picture of the HD output is
progressive and the format is P (pure progressive).
n
Set it with S2 on the FC-83 board. For details, refer to
Section 1-5-5, “FC-83 Board” of “Settings of Switches and
Controls on Boards” of the separate Installation and
Maintenance Manual.
D1011 : FRAME LOCK display
Lights up when the frame phase of the main reference and
sub reference is detected normally.
D1012 : FRAME REF IN display
Lights up when the sub reference for frame lock is input.
D1013 : 0
Factory use only
D1014 : 6
Factory use only
D1015 : 1
Factory use only
D1016 : 7
Factory use only
D1017 : 2
Factory use only
D1018 : 8
Factory use only
D1019 : 3
Factory use only
D1020 : 9
Factory use only
D1021 : 4
Factory use only
D1022 : 5
Factory use only
1-4. Functions of the Indicators on the Boards