SOYO SY-K7VEMPRO V1.0 - Manual (Page 13)

SY-K7VEMPRO V1.0 Quick Start Guide
13
Qu
ic
k BIOS
Setup
3 3
Quick BIOS Setup
This Motherboard does not require any hardware jumpers to set the CPU operating
frequency.
After completion of hardware installation, turn the power switch on, then press the <DEL> key
while the system diagnostic is checking to enter the Award BIOS Setup program. The CMOS
SETUP UTILITY will be displayed on screen. Then follow these steps to configure the CPU
settings.
Step 1. Select [Standard CMOS Features]
Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to “Auto”.
Step 2. Select [Load Optimized Defaults]
Select the “Load Optimized Defaults” menu and type “Y” at the prompt to load the BIOS
optimal setup.
Step 3. Select [SAVE & EXIT SETUP]
Press <Enter> to save the new configuration to the CMOS memory, and continue with the
boot sequence.