SOYO SY-K7VEMPRO V1.0 - Manual (Page 3)

SY-K7VEMPRO V1.0 Quick Start Guide
3
In
tr
oduction
1 1
Introduction
Congratulations on your purchase of the SY-K7VEMPRO V1.0 Motherboard. This Quick
Start Guide illustrates the steps for installing and setting up your new Motherboard.
This guide provides all users with the basic steps of Motherboard setting and operation.
For further information, please refer to the SY-K7VEMPRO V1.0 Motherboard Users’
Guide that came with your Motherboard.
Unpacking
When unpacking the Motherboard, check for the following
items:
The SY-K7VEMPRO V1.0 VT8361 PCI Motherboard
The Quick Start Guide
The Installation CD-ROM
SOYO Bonus Pack CD-ROM
One IDE Device ATA 66 Flat Cable
One Floppy Disk Drive Flat Cable
One Heat Sink Compound
One Serial port flat cable with a 9-pin connector