Two-sided copying – Sharp AR-164 User Manual
Page 24
22
MAKING COPIES
TWO-SIDED COPYING
Two-sided copies can be made on this copier using the bypass tray.
1
Place the first original on the original table and make a
copy.
●
The first copy can be made using any of the paper feed stations.
2
Replace the first original with the second original and
close the platen cover.
●
Make sure that the first and second originals are oriented in the same
way on the original table.
●
When the originals are placed horizontally, make sure that the first and
second originals are oriented in the reverse way on the original table.
●
The first and second originals can be set in the document feeder tray.
However they must be set individually.
3
Turn the first copy over left to right and place it into the
bypass tray.
●
Be sure to feed the copies one sheet at a time.
4
Use the TRAY SELECT key to select the bypass tray.
5
Press the START key.
Two-sided copying