Sharp AR-164 - Manual (Page 52)

50
GENERAL INFORMA
TION
USER PROGRAMS
User programs
Program No. 12: Account number change
Program No. 12 is used to change account numbers. When program No. 12
is entered, an account number will appear in the copy quantity display.
● If no account number has been registered, “12E” will appear in the copy
quantity display. Press the
key. The copier will return to step 2 on page
47.
1. To delete an individual account, press the 0 key.
To delete all accounts, press key 1.
2. Press the START key.
● If you have pressed the 0 key in step 1, an account number will appear
in the copy quantity display. Proceed to step 3.
● If you have pressed key 1, all account numbers will be deleted.
Proceed to step 5.
3. Use the copy ratio display ( ) key to select the account
number to be deleted.
● Use the key to advance through the account numbers.
4. Press the START key.
● The specified account will be deleted.
5. To continue with other user programs, enter another
program number. To exit the user program mode, press
the light (
) key.
Program No. 13: Account number deletion
Program No. 13 is used to delete accounts. When program No. 13 is entered,
“0” will blink on the right side of the copy quantity display.
● If no account number has been registered, “13E” will appear in the copy
quantity display. Press the
key. The copier will return to step 2 on page
47.
1. Use the copy ratio display ( ) key to select the account
number to be changed.
● Use the key to advance through the account numbers.
2. Press the START key.
● The account number will be erased and “– – – ” will blink in the copy
quantity display.
3. Enter a new account number using the numeric keys.
4. Press the START key.
● If a number that is already registered or “000” is entered, the number
will blink in the copy quantity display.
5. Repeat steps 1 to 4 for other account numbers.
6. To continue with other user programs, press the key
and enter another program number. To exit the user
program mode, press the light (
) key.