Schumacher SE-1 - Manual (Page 13)

 1.5-Amp Charger and Maintainer
 Fully Automatic – once battery is charged, unit
switches from Full Charge to Float-Mode Monitoring

Microprocessor Controlled
 Automatic Voltage Detection
 Automatic Temperature Compensation
 Thermal Runaway Protection

Safety Start
– charger will not supply current to
battery until it is properly connected to a battery.
 LEDs – indicate Charging, Charged and Power
 Quick-Disconnect Harness
 Utilize ring connector and only hook harness up
once
 No need to remove battery again to charge
 Both the 50-Amp clamp & ring connectors snap
into place in seconds
 Reverse-Hookup Protection
Speed Charge Maintainer
Model SEM-1562A