Sony DHG-HDD250 - Manual (Page 17)

Introduction to High-Definition Digital Video Recorder (HD DVR)
11
qj PREV Press to replay the current program from the
previous Chapter Mark (if available) or from the
beginning of the Live TV pause time.
qk AUX (Power) Press to turn the selected TV, DVD or AMP on or off.
(See “Using your DVR Remote Control with Other
Equipment” on page 16.)
ql DVR (Power) Press to turn the HD DVR on or into stand-by mode.
The HD DVR may still record previously scheduled
programs even when in stand-by mode.
w; PIC MODE Press to switch between the Picture Mode settings of
compatible Sony® TVs.
wa TV/VIDEO Press to switch between the various inputs of your
TV. (See “Using your DVR Remote Control with
Other Equipment” on page 16.)
ws CH (channel) +/- Press to change channels. When the program guide
is open, pressing the CH+/- buttons pages through
the guide channels.
wd VOL (volume) +/- Press to adjust the volume of your TV or AMP. (See
“Using your DVR Remote Control with Other
Equipment” on page 16.)
wf FAVORITE Press to open the Favorite List.
wg TV GUIDE Press to open the TV Guide On Screen™ interactive
program guide. Press again to exit the guide.
wh REC LIST Press to open the RECORDINGS List which contains
any programs that may have been recorded and are
available for play back.
wj ADVANCE Press to advance forward a set period of time when
playing back a recorded program.
wk FF Press to play a program in fast forward mode. Press
repeatedly to cycle through the available FF speeds.
wl SLOW Press to play a program in slow speed. Press
repeatedly to cycle through the available SLOW
speeds.
e; NEXT Press to advance forward to the next Chapter Mark
(if available) or to Live TV when playing back a
recorded program.
✍
If you lose your remote control, you may use the front panel buttons to operate your HD DVR (see
page 5). Contact your nearest Sony dealer to order a suitable replacement remote control. To find the
dealer nearest you, please refer to “Contacting Sony” on page 79.
Button Description