Sony DHG-HDD250 - Manual (Page 46)

40
Operating Instructions
Audio Dolby Digital: If you are using an external audio system or TV
that supports Dolby Digital® audio, select Auto On (The unit is
shipped with factory setting of Off.). If you are using an audio
system or TV that only receives PCM digital audio signals,
select Off.
✍
Do not select the Auto On setting if connecting to a device that is
not capable of decoding Dolby Digital audio. Doing so may cause
the audio receiver to create unwanted noise that could potentially
cause harm to audio equipment.
Default Digital Audio: Select from one of the following:
English, Spanish, French and Native. The HD DVR will output
the associated audio track if it is available from the broadcast.
Current Digital Audio:
Select the available audio tracks of the
current program, if any.
Default Analog Audio:
Select from one of the following:
Stereo , SAP or Mono. When you view a program broadcast in
mono, you will hear only mono sound, even though Stereo
mode is set. When Second Audio Program "SAP" mode is set,
the programs second audio program is heard in mono, if
available.
Current Analog Audio:
Select Stereo, SAP or Mono.
Selecting Stereo will provide stereo reception when a program
is broadcast in stereo. Select SAP to automatically switch to
Second Audio Program when a signal is received. If no SAP
signal is present, the audio remains in Stereo mode. Select
Mono to reduce noise during a weak stereo broadcast.
Options Descriptions