Sanyo DS27930 - Manual (Page 12)

The on-screen menu provides the viewer with easy access to adjustments and settings. Just use
the keys on the remote control and follow the on-screen instructions.
How to operate the On-screen Menu
1. Press MENU key.
2. Use the
▲/▼ keys to highlight the desired
feature.
3. Use the – /+ keys to choose desired
option. ( ➧ indicates selected item.)
4. Press the MENU key to exit.
Items with submenus requires additional
steps.
Setting the Clock
To use the Auto Clock feature, a local PBS
station that is broadcasting an XDS signal
must be received. The Auto Clock searches
for the transmitted signal and automatically
sets the clock. (This may take several seconds.)
To set the clock automatically
1. Press MENU key.
2. Use the + key to activate Auto setting.
Notes:
The clock will be cleared after a power interruption.
When power is restored, the TV will display the Auto
Clock setup menu on the screen automatically.
Cable Box and Satellite users must set the clock manually.
To set the clock manually
1. Press the MENU key.
2. Press the
▲ or ▼ key to select Clock.
3. Press the MENU key to choose Manual .
4. Use the – key to set the hour and the + key to set the minutes.
Setting Audio Mode
Select desired sound setting, Stereo, Mono, or SAP (secondary audio program).
Note: Stereo and SAP must be part of the broadcast signal.
1. Choose Stereo, Mono, or SAP from the Audio
options.
Note: The TV will automatically reset to stereo
if unplugged or a power failure occurs.
▲▼ keys – + keys
▲▼ keys – + keys
Clock
➧Manual Auto
Audio ➧Stereo Mono SAP
Picture /Sound ➧Sports Movie
News Manual
Initial Channel ➧OFF ON C---
Antenna ➧Cable VHF/UHF
CH. Search ➧NO Start
CH. Scan Memory C 34 Added
Aspect Ratio
➧4:3 16:9
Scan Velocity OFF Low
➧High
TV Speakers ➧ON OFF
Audio Output ➧Fixed Variable
Espanol
Menu Language ➧English Francais
Press MENU key to exit
Auto Clock Setting
Press MENU key to cancel
TV Adjustment and Setup
12
On-Sreen Menu / Setting the Clock / Audio Mode
Clock Clock Manual ➧Auto Auto
▲▼ keys – + keys
Clock Clock ➧Manual Manual Auto
10:30 10:30
▲▼ keys – + keys
Clock
Audio Audio ➧Stereo Stereo Mono SAP
QuickTips
■ The menu will
display on the
screen for approxi-
mately 20 seconds.
Press MENU again
to redisplay.
■ Use the CHANNEL
▲ / ▼ keys and the
VOLUME – /+ keys
to navigate through
the menus and to
make selections
from the menus.
■ To see the time
of day after setting
the clock, press the
DISPLAY key.
■ Extended Data
Service (XDS)
signal may not be
transmitted by all
broadcasters.
■ Under weak stereo
signal conditions,
you may receive
better quality sound
in the “Mono”
position.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032