Shure AXS1 - Manual (Page 6)

5
AXS 3 DYNAMIC MICROPHONE
The AXS 3 is a dynamic vocal microphone designed for sound rein-
forcement and project studio recording applications.
Its smooth frequency response is tailored for vocals. The cardioid po-
lar pattern remains uniform throughout its frequency range, ensuring
high gain before feedback, maximum rejection of unwanted sound,
and minimum off-axis sound coloration. A neodymium magnet pro-
vides high output level and high signal-to-noise ratio.
A steel mesh ball grille, die-cast handle, and proven shock mount sys-
tem ensure reliable performance, even in the roughest environments.
SPECIFICATIONS
Type: Dynamic
Polar Pattern: Cardioid (unidirectional), symmetrical about axis
(Figure 3)
Frequency Response: 80 to 15,000 Hz (Figure 3)
Output Impedance:Rated at150
Ω
(290
Ω
actual) for microphone
inputs rated at 75 to 300
Ω
Output Level (at 1 kHz): –54.0 dBV/Pa ( 2.00 mV), open circuit
voltage*
*1 Pa = 94 dB SPL
Polarity: Positive pressure on diaphragm produces positive volt-
age on pin 2 relative to pin 3 of the microphone output connector
Operating Temperature Range: –29
°
to 57
°
C (–20
°
to 135
°
F), at
0 to 95% relative humidity.
Switch: Built-in On/Off switch
Connector: 3-pin male XLR connector designed to mate with Can-
non XL series, Switchcraft A3 (Q.G.) series, or equivalent
Case: Die cast zinc handle, black matte finish, dent-resistant ta-
pered grille
Dimensions: 179 mm L x 50 mm W (7.1” L x 2.0” W)
Net Weight: 298 g (10.5 oz)
FURNISHED ACCESSORIES
Storage Bag 26A13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Break-Resistant Swivel Adapter A25D . . . . . . . . . . . . . . . . . . . . .
OPTIONAL ACCESSORIES
Shock Stopper
TM
Isolation Mount A55M . . . . . . . . . . . . . . . . . . .
Windscreen (7 colors available) A58WS Series . . . . . . . . . . . . .
7.6 m (25 ft) Cable (XLR to XLR) C25J . . . . . . . . . . . . . . . . . . . .