• [White Balance] cannot be adjusted in Intelligent Auto Adjustment, or Easy Shooting mode.
• [Flash] in [White Balance] cannot be adjusted in the following situations:

– In Sweep Panorama
– In Movie Mode
– When Scene Selection is set to

(High Sensitivity) mode.

• Under fluorescent lights that flicker, the white balance function may not work correctly even though you

select [Fluorescent White Balance 1], [Fluorescent White Balance 2], or [Fluorescent White Balance 3].

• When shooting with a flash in other than [Flash] mode, [White Balance] is set to [Auto].
• When flash is [On] or [Slow Synchro], the white balance can only be adjusted to [Auto], [Flash], [One

Push], or [One Push Set].

• [One Push Set] is unable to be selected while charging the flash.

(Auto)

Adjusts the white balance automatically so that the colors appear
natural.

(Daylight)

Adjusts for outdoors conditions on a fine day, evening views, night
scenes, neon signs, fireworks, etc.

(Cloudy)

Adjusts for a cloudy sky or a shady location.

(Fluorescent

White Balance 1)

(Fluorescent

White Balance 2)

(Fluorescent

White Balance 3)

[Fluorescent White Balance 1]: Adjusts for white fluorescent
lighting.
[Fluorescent White Balance 2]: Adjusts for natural white
fluorescent lighting.
[Fluorescent White Balance 3]: Adjusts for day white fluorescent
lighting.

(Incandescent)

Adjusts for places under incandescent lamp, or under bright
lighting, such as in a photo studio.

(Flash)

Adjusts for the flash conditions.

(One Push)

Adjusts the white balance depending on the light source. The white
color memorized in [One Push Set] mode becomes the basic white
color. Use this mode when [Auto] or other modes cannot be set the
color properly.

(One Push

Set)

Memorizes the basic white color which will be used in [One Push]
mode.

Notes

Advertising

Popular Brands

Popular manuals