Sharp UX-A1000 - Manual (Page 45)

Transfer Function
43
2. Ans
w
er
ing
Machi
n
e
Recording the transfer message
The transfer message plays when you answer the telephone, and informs you
that the call is a transfer call. It can be up to 15 seconds long. To record a
transfer message, follow the steps below. The following is an example:
“Hello. This is a transfer call for (YOUR NAME). Enter your remote code
number now.”
1
Press once and twice.
2
Press once.
3
Lift the handset.
(If you have already recorded a
message, you can press to
listen to the message, or press
to delete the message.)
4
Press and speak into the handset to record the message.
•
The transfer message can be up to 15 seconds long. While recording, the
display will show the time left to record.
5
When finished, replace the handset or press .
REC/MEMO
PLAY
DELETE
START/
MEMORY
STOP
Display:
OGM2(TRANSFER)
all.book Page 43 Wednesday, November 12, 2003 9:50 AM