Sharp UX-A1000 - Manual (Page 68)

Sending a Fax by Automatic Dialing
66
1
Load the document(s).
•
If desired, press to set
the resolution and/or contrast.
2
Press the Rapid Key corresponding to
the desired Speed Dial number.
•
The name of the receiving party will
appear in the display. If no name was
stored, the fax number will appear. (If
the name or number is incorrect, press
.)
•
The document will be automatically
transmitted once the connection is
established.
•
If the transmission is completed successfully, the machine will beep once.
•
If an error occurs, the machine will beep three times and print a Transaction
Report to inform you of the problem (see page 102).
Using a Rapid Key for a voice call
To use a Rapid Key for a voice call, simply lift the handset and then press the
Rapid Key.
RESOLUTION/
RECEPTION MODE
STOP
Example: To dial Speed
Dial number 01, press
Rapid Key 01.
01
Rapid Key Dialing
If the number you want to dial has been stored as a Speed Dial number from
01 to 18, you can dial it by pressing the corresponding Rapid Key.
READY TO SEND
all.book Page 66 Wednesday, November 12, 2003 9:50 AM