Sanyo VM-6609 - Manual (Page 8)

BASIC OPERATION
1
Press the POWER switch to turn on the power.
ON: The power is turned on (the POWER indicator is lit).
OFF: The power is turned off (the POWER indicator is off).
2
Select the picture input.
Use the monitor selector switch at the front of the monitor to select the picture being input to either the A or B input
terminal.
NOTE: If there is no input source connected to either the A or B input terminal, no picture will appear when that input
terminal is selected.
3
Adjust the picture.
Adjusting the picture brightness
Turn the BRIGHT control to the left or right to adjust the picture brightness.
Right: The picture becomes brighter
Left: The picture becomes darker
Adjusting the picture contrast
Turn the CONTRAST control to the left or right to adjust the picture contrast.
Right: The picture becomes sharper
Left: The picture becomes softer
L8MAA/US (VMC-6609, 6612, 6615, 6620 GB) 2000. 11. 21
7