Sanyo 720P/1080P HDTVLCD DP32242 - Manual (Page 17)

17
En
g
lish
SETUP ( Other function settings. )
Language
ANT/Cable setup
USB photo viewer
Power saving
First time setup
About
Reset to defaults
Function Items Description
Language
English/Español/
Français
Selects the screen menu language.
ANT/Cable setup
See p.22 for more
detail The current channel settings can be changed according to your needs
and reception conditions.
USB photo viewer
See p.19 for more
detail
You can enjoy photo contents stored in a USB storage device.
Power saving
No signal for 15
minutes(Stay on/
Power TV off)
To conserve energy, the TV automatically turns off when NO SIGNAL
and NO OPERATION continue for more than 15 minutes.
‡ “No signal for 15 minutes was activated” will be displayed for about
10 seconds when the TV is turned on for the first time after the
power was turned off by “No signal for 15 minutes”.
‡ The on-screen display will flash 3, 2 and 1 to indicate the last three
(3) remaining minutes prior to the shut-off.
No activity for 4
hours(Stay on/
Power TV off)
To conserve energy, the TV automatically turns off when no operation
of remote and side panel key continues for more than 4 hours.
‡ No activity for 4 hours was activated” will be displayed for about 10
seconds when the TV is turned on for the first time after the power
was turned off by “No activity for 4 hours”.
‡ The on-screen display will flash 3, 2 and 1 to indicate the last three
(3) remaining minutes prior to the shut-off.
First time setup Restarts the first time setup from “Language” setting.
About Displays TV version.
Reset to defaults Yes / No
Performing Reset will clear all settings made with Setup, such as
channel settings.
‡ Password setting/entering, please see p18.