Sea & Sea 860G - Manual (Page 5)

1
2
2
m
m
+
-2
1
2
2
m
m
+
-2
165 mm+-2
Getting Ready
Charging The Battery With The Charger
The battery is not charged when the camera is shipped. Charge the battery before use.
It is recommended to charge a new battery for more than
4 hours.
It's normal that the temperature of the battery and
camera body rises after a period of time of using.
Charging Procedure
(a) Insert the battery to the battery slot by the polarity indications.
(b) Connect the charger to the electrical outlet.
(c) The LED will light up in red color when charging.
(d) The charging is completed when the LED turns green.
(e) Remove the battery when the charging is completed.
8
9
A message of "Low Light!" appearing on the TFT LCD Monitor is a warning to remind you to go to the Flash Mode and select Auto Flash
or Fill-in flash to get more light sources so as to compose a superior quality image.
In such cases shown as follows, please release the shutter button, then try to re-compose the shot and focus again because the Auto Focus
function may be difficult to use with.
The subject is far away from the photographer or in the dark.
The subject is viewed through a piece of glass or window.
A fast-moving or a flashing subject is passing through.
The subject has a reflection attribute like a mirror, a luminous body, or a lustrous subject.
Do not touch the lens when it is in use.
Getting Ready
6M
14