SMC Networks 5MC2671W - Manual (Page 50)

W
EB
M
ANAGEMENT
38
Wireless
To configure the SMC2671W as an Ethernet Adapter, all you
need to do is define the radio channel, the Service Set Identifier
(SSID), and encryption options.
In Ethernet Adapter mode or Range Extender mode, the radio
channel and SSID (Service Set ID) of the SMC2671W must be
set to the same values as those of the access point with which
they are associated.
If the SMC2671W is in Access Point mode, you must specify a
common radio channel and SSID (Service Set ID) to be used by
the Wireless Ethernet Adapter and all of your wireless clients. Be
sure you configure all of your clients to the same values.