Schneider Optics Web Embedded Server - Manual (Page 40)

The MSTR Instruction
30 840 USE 115 00 Version 1.0
Hex Error Code Meaning
5016 An argument is valid
5017 An internal table has run out of space.
5020 The connection is broken.
5023 This operation would block and the socket is nonblocking.
5024 The socket is nonblocking and the connection cannot be completed.
5025
The socket is nonblocking and a previous connection attempt has not yet
completed.
5026 socket opreation on a nonsocket.
5027 The destination address is invalid.
5028 Message too long.
5029 Protocol wrong type for socket.
502A Protocol not available.
502B Protocol not supported.
502C Socket type not supported.
502D Operation not supported on socket.
502E Protocol family not supported.
502F Address family not supported.
5030 Address is already in use.
5031 Address is not available.
5032 Network is down.
5033 Network is unreachable.
5034 Network dropped connection on reset.
5035 The connection has been aborted by the peer.
5036 The connection has been reset by the peer.
5037 An internal buffer is required, but cannot be allocated.
5038 The socket is already connected.
5039 The socket is not connected.
503A Can’t send after socket shutdown.
503B Too many references; can’t splice.
503C connection timed out.
503D The attempt to connect was refused.
5040 Host is down.
5041 The destination host could not be reached from this node.
5042 Directory not empty.
5046 NI_INIT returned