Smeg CS71-5 - Manual (Page 23)

Instructions for the user
10.2.2 Burner caps and flame cap crowns
The caps and flame-spreader crowns are extractable to
facilitate cleaning. Wash them in hot water with non-
abrasive detergent, taking care to remove any
incrustations, and wait until they are perfectly dry.
Replace the flame-spreader crowns, checking that they
are positioned in their housing with their respective caps,
taking care that flame-spreader holes A correspond to
the spark plugs and the thermocouples.
10.2.3
Ignition plugs and thermocouples
To work well, the ignition plugs and thermocouples must
always be very clean. Check them frequently and clean
them with a wet rag if necessary. Any dry residue should be
removed with a toothpick or a needle.
10.3
Cleaning the inside of the oven
For best oven upkeep clean regularly after having allowed to cool. Take
out all removable parts.
Clean the oven grill and side guides with hot water and non-abrasive
detergent. Rinse and dry.
For easier cleaning, the storage drawer underneath the oven can be
completely removed.
Pull it right out and raise the front (as for an ordinary drawer).
10.3.1 Self-cleaning liners
The main oven is equipped with continuous self-cleaning enamelled
liners.
These liners make the oven easier to clean and ensure its efficiency over
time.
53