Speco Technologies CVC-6246IHR - Manual (Page 24)

Operating your camera – REDUCE NOISE
① Press the SET button to display the SETUP menu and move the
arrow indicator to ‘DNR’ using the UP or DOWN button.
② SET ‘REDUCE NOISE’ to the desired mode using the LEFT
or RIGHT button.
6) REDUCE NOISE (Dynamic Noise Reduction)
DNR reduces the noise on the screen.
▶ HIGH : High reduction of noise
▶ MIDDLE : Middle reduction of noise
▶ LOW : Low reduction of noise
▶ OFF : Deactivation
If you change the ‘GAIN’ menu from AGC-L to AGC-H
sensitivity is increased as well as noise on the screen.
When selected ‘GAIN’ menu OFF, DNR will not work.
Notes
23