Speco Technologies CVC-6246IHR - Manual (Page 30)

Operating your camera – MOTION DETECTION
① Press the SET button to display the setup menu and move the arrow
indicator to ‘MOTION DET’ using the UP and DOWN button.
② SET ‘MOTION DET’ to the desired mode using the LEFT or RIGHT button.
D) Whenever your camera detects motion, THE WORDS “motion
detected’ will appear on the screen.
▶OFF : Deactivation
▶ON : MOTION DET. Activated
- Press SET button.
- Move the arrow indicator to ‘AREA SET’ using UP and
DOWN button, and then press the SET button.
- Set the areas you want to observe.
29