Siemens C2-010 User Manual
Page 39
ADSL2+ Router User’s Guide
5-13
5.11 ATM VCC
The ATM Virtual Circuit connection menu is used to configure the WAN connection. If you are using
multiple PVCs, you can change the configuration of any PVC in this menu. To create new or additional PVCs,
read the section below on Multiple PVCs.
This menu can be used as an alternative menu to configure the same settings found on the WAN menu
in the Home directory.
Figure 5-12. ATM VCC menu
To configure an existing PVC configuration set, click the corresponding notepad icon in the right-hand
column of the ATM VCs List. The PVCs current settings appear above in the entry fields of the ATM VC
Settings menu. Configure the appropriate settings and click the Apply button to put the new settings into
effect.