Sony SAT-HD200 - Manual (Page 32)

3. SETUP AND CONNECTIONS
31
3-6. VCR Connection
Cable TV
wall jack
Antenna
ANT.IN V L R
IN
VCR
Phone wall jack
LNB
Sat B LNB
Sat C LNB
Sat A
Dish
5x4 Multi-switch
Output
TV Viewing
Refer to Section 3.5, ‘TV Connection’.
VCR Recording
1. Connect the “OUT TO TV” jack on the DIRECTV ® High-Definition Receiver to the “ANT IN” jack on your
VCR using a coaxial RF cable.
2. Connect the “AUDIO OUT” and “VIDEO OUT” jacks on the DIRECTV HD Receiver to the “A/V IN” jack on your
VCR using a RCA-type cable. (If your VCR is equipped with an S-Video jack, use the “S-Video” jack)
(Note: The OUT TO TV and VIDEO OUT 1 / 2 jacks are available when the Video 1/2 display format is
selected)