Swim'n Play side deck - Manual (Page 12)

12
Secure the two deck ledges and the ledge
section of each 4’x5’ patio to the top plates.
Drill a ¼” hole in the deck ledges and secure to
the top plates using the sheet metal screws that
were provided with your pool for the ledges.
Attach the top covers
that came with your
pool over the connection
where the deck ledges
meet your standard
pool ledges.
It may be required
to cut or trim your
top cover for a proper fi t.
GENERAL ASSEMBLY ILLUSTRATION
Use the General Assembly Illustration below for reference as you assemble the Fensurround.
END POST
OR
CORNER POST
STANDARD POST
FENCE BRAKET
INSERTED
THROUGH POST