Swim'n Play side deck - Manual (Page 4)

4
1
Clear out and level the ground in the location where
your deck is to be installed.
Use the following chart for the area size:
POOL
DECK
A
B
2
SIZE A B
12 x 18 8 ft. 6 ft.
12 x 24 12 ft. 6 ft.
15 x 24 12 ft. 6 ft.
15 x 30 16 ft. 6 ft.
18 x 33 16 ft. 6 ft.
18 x 45 28 ft. 6 ft.
ASSEMBLE FENCE POST BRACKETS ON DECK SIDE
If your pool is fi lled with water it will be necessary for you to lower the water level
to 2’ deep in order to assemble the Fence Post Brackets to the pool.
Before assembling your pool, take the Verticals or Buttress Posts, for the straight side of the
pool where the deck is to be assembled and attach two Fence Post Brackets to each using
the 1/4 x 20 x 3/4” screws, washers and hex nuts provided as shown at the bottom.
If the vertical or Buttress post do not have pre-drilled holes,
simply measure down the required distance from the top and
place the bracket on the post or vertical as shown.
Use a distance of 2-3/8” for the Buttress post and
a distance of 3” for the Vertical.
Then using the Post Bracket as a template drill through
the Vertical or Buttress post using a 5/16” drill bit.
FENCE POST
BRACKETS
(2 Pieces)
1/4" TRUSS
HEAD SCREW
BUTTRESS POST
WASHER
HEX
NUT
These Locations on the
30 x 15 Pool
LEVEL GROUND
FENCE POST
BRACKETS
(2 Pieces)
1/4" TRUSS
HEAD SCREW
VERTICAL
WASHER
HEX
NUT
3”
2-3/8”