Setting up the wireless system, Setting up the s-air main unit – Sony WAHT-SA20 User Manual

Page 8

Advertising
background image

8

US

Note

• Do not connect the speaker cords supplied with

the Wireless Surround Kit to any of the speaker
jacks on your S-AIR main unit.

4

Connect the AC power cords
(mains leads).

Before connecting the AC power cords
(mains leads) of your S-AIR main unit
and the surround amplifier to wall
outlets (mains), make sure that all
speakers are connected.

To use the wireless system, you need to set
up the surround amplifier and your S-AIR
main unit. Before setting, make sure that the
wireless adapters are correctly inserted in
the S-AIR main unit and surround amplifier.

Setting up the S-AIR main
unit

For details on using the S-AIR main unit,
refer to the operating instructions of the
S-AIR main unit.

1

Turn on the S-AIR main unit.

The system turns on.

2

Set up the S-AIR main unit so it is
ready for ID setting.

3

Select the ID for the S-AIR main
unit.

You can select any ID (A, B, or C).

Setting Up the Wireless
System

Advertising