Servis-Rhino SE10-4A - Manual (Page 146)

MAINTENANCE
SE10-4A/SE15-4A 03/09 Maintenance Section 5-2
© 2009 Alamo Group Inc.
MAINTENANCE
Before operating your Rotary Mower, make sure it is properly lubricated and thoroughly inspected. Only a
minimum of time and effort is required to regularly lubricate and maintain this machine to provide long life and
trouble free operation.
Always disengage the PTO before raising the Rotary Cutter for transporting or making
adjustments.
Lubrication
Do not let excess grease collect on or around parts, particularly when operating in sandy areas. The
accompanying illustration shows lubrication points. The chart gives the frequency of lubrication in hours, based
on normal operating conditions. Severe or unusual conditions may require more frequent lubrication.
Use Multi-Purpose Gear Oil P/N 00786250 when required in Gearbox. Use N.L.G.I #2 grease for all locations
designated with grease gun. Be sure to clean the fitting thoroughly before using grease gun. Failure to
maintain proper lubrication will result in damage to U-joints, gearbox, and/or driveshaft.
When attaching QD. yoke to tractor PTO, or gear box shaft, it is important that spring
activated locking pin or collar slides freely and locking balls are seated in groove on splined
shaft. A loose yoke could slip off and result in personal injury or damage to cutter.