SMC Networks EZ ConnectTMg 2.4 GHz 54Mbps SMC2602W - Manual (Page 27)

U
SING THE
SMC2802W U
TILITY
P
ROGRAM
18
Or
1. Select 128-bit or 64-bit in the Encryption field.
2. In the Key type field, select ASCII or Hex.
3. In the Default key field, select one key to use as the
encryption key.
4. Manually type in a string of characters in the corresponding
key number field that you selected in step 3.
5. Click Apply changes to allow the settings to take effect.
Note: When setting up WEP without using the Passphrase
function, if the Key Type is set to Hex, only hexadecimal
characters (range: 0~9 and A~F) can be used. When
Encryption is set to 64-bit, a maximum of 10 Hex
characters can be entered in the key field.
When Encryption is set to 128-bit, a maximum of 26 Hex
characters can be used.
If the Key Type is set to ASCII, and Encryption is set to
64-bit, then 5 ASCII digits can be used in the Key field.
For 128-bit Encryption, 13 ASCII characters can be used.