Sears Diehard Portable Power 1150 28.71988 - Manual (Page 3)

• 2 •
Do not put fingers or hands into any of the 1.4 jump starter’s outlets.
Do not expose the 1.5 jump starter to rain or snow.
To reduce the risk of electric shock, turn off and/or unplug the jump starter before attempting 1.6
any maintenance or cleaning. Simply turning off the controls will not reduce this risk.
Do not operate the
1.7 jump starter if it has received a sharp blow, been dropped or
otherwise damaged in any way; take it to a qualified service person. (Call customer
service at: 1-800-732-7764.)
Do not disassemble the
1.8 jump starter; take it to a qualified service person when service
or repair is required. Incorrect reassembly may result in a risk of fire or electric shock.
(Call customer service at: 1-800-732-7764.)
RISK OF EXPLOSIvE GASES.
WORKING IN THE VICINITY OF A LEAD-ACID BATTERY IS 1.9
DANGEROUS. BATTERIES GENERATE EXPLOSIVE GASES DURING
NORMAL BATTERY OPERATION. FOR THIS REASON, IT IS OF UTMOST
IMPORTANCE THAT YOU FOLLOW THE INSTRUCTIONS EACH TIME YOU
USE THE jUMP STARTER.
To reduce the risk of a battery explosion, follow these instructions and those published 1.10
by the battery manufacturer and the manufacturer of any equipment you intend to use
in the vicinity of the battery. Review the cautionary markings on these products and on
the engine.
PERSONAL PRECAUTIONS
2.
RISK OF EXPLOSIvE GASES. A SPARK
NEAR THE BATTERY MAY CAUSE A
BATTERY EXPLOSION. TO REDUCE THE
RISK OF A SPARK NEAR THE BATTERY:
Working in the vicinity of a lead-acid 2.1
battery is dangerous. Batteries generate
explosive gases during normal battery operation. For this reason, it is of utmost
importance that you follow the instructions each time you use the jump starter.
NEVER smoke or allow a spark or flame in the vicinity of a battery or engine.
2.2
Do not permit the internal battery of the jump starter to freeze. Never charge a frozen 2.3
battery.
To prevent sparking, NEVER allow clips to touch together or contact the same piece of metal.
2.4
When charging the internal battery of the jump starter, work in a well ventilated area 2.5
and do not restrict the ventilation in any way.
Be extra cautious to reduce the risk of dropping a metal tool onto a battery. It might
2.6
spark or short-circuit the battery or other electrical part that may cause an explosion.
Remove personal metal items such as rings, bracelets, necklaces and watches when
2.7
working with a lead-acid battery. A lead-acid battery can produce a short-circuit current
high enough to weld a ring or the like to metal, causing a severe burn.
Be sure the area around the battery is well ventilated while the jump starter is being used.
2.8
RISK OF CONTACT WITH BATTERY ACID. BATTERY ACID
IS A HIGHLY CORROSIvE SULFURIC ACID.
Consider having someone close enough by to come to 2.9
your aid when you work near a lead-acid battery.
Have plenty of fresh water and soap nearby in case 2.10
battery acid contacts your skin, clothing or eyes.
Wear complete eye and body protection, including safety goggles and protective 2.11
clothing. Avoid touching your eyes while working near the battery.
If battery acid contacts your skin or clothing, immediately wash the area with soap and
2.12
water. If acid enters your eye, immediately flood the eye with cold running water for at
least 10 minutes and get medical attention right away.
If battery acid is accidentally swallowed, drink milk, the whites of eggs or water. DO
2.13
NOT induce vomiting. Seek medical attention immediately.
Stay clear of fan blades, belts, pulleys and other parts that may cause injury.
2.14