Pi-8, Pre-delivery inspection – Subaru Impreza 2004 User Manual

Page 72

Advertising
background image

PI-8

PRE-DELIVERY INSPECTION

Pre-delivery Inspection

17.AT FRONT DIFFERENTIAL OIL

Check the AT front differential oil amount. If the
amount is insufficient, check that no leaks are
found. Then, add the necessary amount of the
specified AT front differential oil.

18.COOLANT

Check the coolant amount on the reservoir. If the
amount is insufficient, check that no leaks are
found. Then, add the necessary amount of coolant
with the specified concentration.

19.CLUTCH FLUID

Check the clutch fluid amount. If the amount is in-
sufficient, check that no leaks are found. Then, add
the necessary amount of the specified fluid.

20.WINDOW WASHER FLUID

Check the window washer fluid amount. If the
amount is insufficient, check that no leaks are
found. Then, add the necessary amount of washer
fluid commercially available.

21.HOOD LATCH CHECK

Retract the hood stay and close the hood. Check
that the hood is securely latched.

22.KEYLESS ENTRY SYSTEM

Check the keyless entry system operations as fol-
lows.
• Remove the key from the ignition switch and
close all the doors including rear gate (wagon mod-
el).
• Press the “LOCK” button on the transmitter mo-
mentarily once and check that all the doors are
locked and the hazard light flashes once.

• Press the “OPEN” button on the transmitter mo-
mentarily once and check that all doors are un-
locked, the hazard light flashes twice and the
interior light illuminates.
• Close all doors and rear gate, press the “LOCK”
button of the transmitter. Press the “OPEN” button
of the transmitter and wait for 30 seconds. Check
that all doors and the rear gate are automatically
locked again.

23.SEAT

Check that each seat provides full functionality in
sliding and reclining. Check all available functions
of the rear seat such as a trunk-through center arm
rest.

24.SEAT BELT

Pull out the seat belt and then release it. Check that
the belt webbing retracts smoothly.

(A) Oil level gauge

(B) Upper level

(C) Lower level

(A) Reservoir tank

(B) MIN level

(C) MAX level

PI-00183

(B)

(C)

(A)

(A)

PM-00076

( A )

( B )

( C )

PI-00108

PI-00109

Advertising