Subaru Impreza 2004 - Manual (Page 88)

PM-12
PERIODIC MAINTENANCE SERVICES
V-belt
TURBO MODEL
2) Loosen the lock bolt (A).
3) Loosen the slider bolt (B).
4) Remove the front side belt (C).
5) Install a new belt, and tighten the slider bolt so as
to obtain the specified belt tension.
6) Tighten the lock bolt (A).
7) Tighten the slider bolt (B).
Tightening torque:
Lock bolt:
25 N·m (2.5 kgf-m, 18 ft-lb)
Slider bolt:
8 N·m (0.8 kgf-m, 5.8 ft-lb)
2. REAR SIDE BELT (DRIVING AIR CONDI-
TIONER)
NOTE:
Wipe off any oil or water on the belt and pulley.
1) Remove the front side belt.
2) Loosen the lock nut (A).
3) Loosen the slider bolt (B).
4) Remove the rear side belt.
5) Install a new belt, and tighten the slider bolt so as
to obtain the specified belt tension.
6) Tighten the lock nut (A).
7) Install the front side belt.
SOHC model
<Ref. to ME(H4SO)-43, FRONT SIDE BELT, IN-
STALLATION, V-belt.>
DOHC Turbo model
<Ref. to ME(H4DOTC)-54, FRONT SIDE BELT,
INSTALLATION, V-belt.>
Tightening torque:
23 N·m (2.3 kgf-m, 17.0 ft-lb)
SC-00096
PM-00004
(B)
(C)
(A)
(A)
(B)
PM-00005