Sun Microsystems 4500/3 - Manual (Page 20)

8 Cluster Platform 4500/3 User’s Guide • July 2001
TABLE 2-1 provides a worksheet to assist with networking information. You will be
referred back to the information you place in this table when you customize the
cluster configuration.
TABLE 2-1 Ethernet IP Address Worksheet
Hardware Components
Your Cluster Platform 4500/3 shipment includes the following hardware
components (see
FIGURE 2-5 for details on cable connectivity between components):
■ Consolidation rack: One Sun StorEdge Expansion Cabinet which includes power
sequencers, front and rear door options, and a fan assembly
■ Management server: One Sun Netra T1 AC200 system configured with one 500
MHz UltraSPARC II CPU, 512 Mbytes of memory and two 18.2-Gbyte boot disks
with mirroring
■ Terminal concentrator: One 8-port terminal concentrator preinstalled in a Sun
StorEdge expansion cabinet
■ Two Sun Enterprise 4500 system servers, each configured with 400 MHz
UltraSPARC II CPUs
■ Four I/O boards with on-board DWIS, four on-board hme network interfaces,
two qfe SBus network interface cards, two on-board FC-ALs with GBICs, internal
DVD and internal 20 Gbyte 4mm DDS4 tape drive
■ Four Netra st D130 boot disks
■ Two Sun StorEdge T3 arrays
Network Device
Ethernet
Address IP Address Node Name
Netra ™ T1 AC200
Terminal concentrator
Sun Enterprise 4500
system No. 1 (node 1)
Sun Enterprise 4500
system No. 2 (node 2)
Sun StorEdge T3 array
No. 1 (node 1)
Sun StorEdge T3 array
No. 2 (node 2)