Sea Eagle Boats 325FC - Manual (Page 2)

2
INTRODUCTION
Sea Eagle FoldCat 325fc & 375fc
Congratulations, you just bought the finest 1 or 2-person
fold up fishing boat on the planet. Before proceeding with
assembly and inflation, please check to see that you have
all necessary parts:
Sea Eagle FoldCat 325fc Deluxe Package includes :
- 325fc FoldCat inflatable hull
- catamaran carry bag
- repair kit* (small orange canister)
- 2 raised oarlock bases with oarlock pins & hardware
- 2 collapsable rowing oars
- 3 aluminum floorboard slats
- 4 aluminum stabilizer underbars
- front aluminum step rod
- wooden motormount with 2 L-brackets & hardware
- 1 quick release swivel seat mount with hardware
- 1 swivel seat
- 2 rod holders with flushmount adapters & hardware
- A-41 bellows foot pump
*Note: The repair kit includes 2 patches, tube of glue,
Halkey Roberts Valve Adapter & Halkey Roberts valve tool.
Sea Eagle FoldCat 375fc Deluxe Package includes :
- 375fc FoldCat inflatable hull
- catamaran carry bag
- repair kit* (small orange canister)
- 2 raised oarlock bases with oarlock pins & hardware
- 2 collapsable rowing oars
- 5 aluminum floorboard slats
- 4 aluminum stabilizer underbars (2 long & 2 short)
- front aluminum step rod
- wooden motormount with 2 L-brackets & hardware
- 2 quick release swivel seat mounts with hardware
- 2 swivel seats
- 2 rod holders with flushmount adapters & hardware
- A-41 bellows foot pump
*Note: The repair kit includes 2 patches, tube of glue,
Halkey Roberts Valve Adapter & Halkey Roberts valve tool.
Sea Eagle FoldCat 375fc Pro Angler’s Package includes :
- 375fc FoldCat inflatable hull
- catamaran carry bag
- repair kit* (small orange canister)
- 2 raised oarlock bases with oarlock pins & hardware
- 2 collapsable rowing oars
- 5 aluminum floorboard slats
- 4 aluminum stabilizer underbars (2 long & 2 short)
- front aluminum step rod
- wooden motormount with 2 L-brackets & hardware
- 2 quick release swivel seat mounts with hardware
- 2 swivel seats
- 4 rod holders with flushmount adapters & hardware
- 1 pedestal for swivel seat with hardware
- 1 aluminum step bench
- nylon storage bag
- A-41 bellows foot pump
*Note: The repair kit includes 2 patches, tube of glue,
Halkey Roberts Valve Adapter & Halkey Roberts valve tool.
ASSEMBLY
The FoldCat 325fc & 375fc requires only one time
assembly of optional aluminum step bench (SE 375fc
only), front aluminum step rod, adapters for rod holders
and quick release swivel seat mounts. These things can
be rolled up with the hull for storage. Most people will
never fully disassemble their FoldCat.
Unroll the FoldCat hull and lay both the pontoons parallel
to each other flat on the floor.
Please note, the ends of pontoons with Halkey-
Roberts valves and two grommets for aluminum step
rod will form the bow of the FoldCat.
Attaching Aluminum Step Rod
Insert the ends of aluminum step rod into the 2 grommets
(1 on each pontoon) in the bow of the FoldCat 375fc in
such a way that the 2 bolts going through the step rod lie
on the inner side. On the SE 325fc, the step rod already
comes attached. It secures to the fabric floor and provides
an easy front carry handle. On the SE 375fc the step rod
serves as a foot rest for the person sitting in the front and
also provides a front carry handle.
Aluminum Step Bench
The aluminum step bench (included only in the SE 375fc
Pro Angler’s Package) is shorter in length than the other 5
aluminum slats. It has only two nylon slotted fittings for
attaching it to the 375fc FoldCat hull.
STEP BENCH