Star Micronics NX-2460C User Manual
Page 22
16
❏ Execute the command that installs the User Setup Utility:
A:\>SETUP
↵
❏ Select the language you want to use and then press
Enter
.
The above screen appears in the language that you selected in the previous
step.
❏ Input the drive and directory names where you want the User Setup Utility
stored. The following is the default directory name that creates a directory
names “star” on your hard disk (drive C:) to store the User Setup Utility.
C:\star
You can use the left and reight arrows,
Delete
and
Backspace
when
making changes in the box that contains the drive and directory names. if
you require assistance while this screen in shown, press
F1
for help.
❏ After you specify drive and directory names, press
Enter
.
The User Setup Utility program is started up as soon as you press
Enter
, so
you can use the pull-down menus to make the setup changes you want.
Please select Language
= Help
Star LC-240(C) / NX-2460(C) Installation of User Setup Utility Version 1.0
English
Deutsch
Français
Italiano
= Enter
= Scroll down
= Scroll up
F1
= Abort
ESC
Directory:
= Help
Star LC-240(C) / NX-2460(C) Installation of User Setup Utility Version 1.0
The HDD installation uses xxxKB of hard disk.
= Enter
F1
Please Select Drive and Directory for Installation
C:\star_
You may install this Printer Setup Utility onto a floppy disk if required,
please see the users manual of the help [F1] for details.
= Abort
ESC