Sharp 20F630 L - Manual (Page 13)

13
Dimension: 140mm x 215mm
Quick Reference Control Operation
L Location of Controls (ENGLISH)
Front Panel
POWER
Press
→ On.
Press again
→ Off.
SENSOR AREA FOR
REMOTE CONTROL
MENU
Press
→ Accesses MAIN MENU.
Press again
→ Exits MAIN MENU.
VIDEO IN 2 L-AUDIO-R
CHANNEL UP/DOWN
(8) Selects next higher channel.
(9) Selects next lower channel. VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
Basic Remote Control Functions
3 2 1
6 5 4
9 8 7
100 0
TV • CATV • VCR • DVD
A B C D
PERSONAL PREFERENCE
9 VCR-CH 8
FLASHBACK
POWER (DVD/VCR)
REC
PLAY
:
L STOP
FWD
)
REW
(
PAUSE
J
POWER
DISPLAY
CATV
INPUT
TV
DVD VCR
ENTER
; :
CH
8
VOL
–
VOL
+
9
CH
MENU MUTE g SKIP f
POWER
Press
→ On.
Press again → Off.
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite programs
by using the 4 categories A, B, C and
D. The channels can be accessed
quickly by using these buttons. (See
page 40.)
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
• In menu mode, changes or selects
the TV adjustments.
MENU
Press
→ Accesses MAIN MENU.
Press again → Exits MAIN MENU.
MUTE
Press
→ Mutes sound.
Press again
→ Restores sound.
• CLOSED CAPTION appears when
sound is muted.
POWER (DVD/VCR)
Press
→ On.
Press again → Off.
DVD/VCR CONTROL
See page 47.
REC
Infrared Transmitter Window
CATV/DVD-TV/VCR MODE buttons
Press TV/VCR, sends power and
channel select commands (Channel up/
down and Random Access buttons) to
the TV and VCR control.
Press CATV/DVD, sends power and
channel select commands to a cable
TV converter and DVD control.
DISPLAY
Press
→ Displays receiving channel for
four seconds.
Press again
→ Removes display.
• Temporarily displays receiving channel
when in Closed Caption mode.
INPUT
Press
→ Switch to external video INPUT
1 mode or COMPONENT mode.
Press 2 times
→ Switch to external
video INPUT 2 mode.
Press 3 times
→ Switch back to the
original TV mode. See page 45.
ENTER
Used in some instances where a Cable
Converter Box requires an “enter”
command after selecting channels,
when using the REMOTE KEYPAD
button. (See page 47)
CHANNEL UP/DOWN
(8) Selects next higher channel.
(9) Selects next lower channel.
• See pages 37 ~ 39 for channel
presetting.
• Moves the “ a ” mark of the MENU
screens.
SKIP/VCR-CH
Note:
• The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the
remote control, place it under a fluorescent light or other lighting.
• The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
• The degree of illumination will vary depending on the strength of lighting used.
• The degree of illumination will decrease with time and depending on the temperature.
• The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
• Sunlight and fluorescent lighting are the most effective when charging the display.
(INSIDE DOOR)
20F630[11-15].p65 25/3/03, 2:50 PM 13