Smeg ALFA201XE - Manual (Page 8)

Instructions for the User
P5.5 or P3.0 for single-phase power connection.
After selecting the appropriate power, press STOP to confirm the setting.
N.B. This power setting operation only has to be carried out the first time
the oven is connected. The value set is saved and automatically used
whenever the oven is switched on after this. To modify this setting or the
time, press START + STOP together to return to the point described in
section "4.3 Setting the time".
4.6 Program selection
This oven has 15 different cooking programs, including:
14 user-editable programs for humidified fan-mode cooking (P1 to P14);
1 manual editable program for fan-mode cooking.
The following table shows the parameters for each program.
Uprh
preheating
temperature
Ut °C
cooking
temperature
U Ct
cooking time
U Ht
humidification
time
P1 Same as edited
Ut°C
Preset 185°C Preset 16'
Editable
P2 Same as edited
Ut°C
Preset 190°C Preset 15'
Editable
P3…P14 Same as edited
Ut°C
Editable Editable
Editable
Same as edited
Ut°C
Editable Editable
N/A
4.7 Humidified cooking
The humidified fan-mode cooking programs the user is able to edit are
from P1 to P14
A number of parameters can be edited for each program:
•
cooking temperature [U t°C]: User heating
•
cooking time [U Ct] : User cooking time
•
humidification cycles [U Ht]: User humidity time
See cycle examples below
27