Samsung SCX-4720FN - Manual (Page 40)

2
G ETTING S TARTED 2.13
If you want to use a parallel printer cable, purchase only an
IEEE-1284 compliant parallel cable and connect it to the
parallel connector on your machine.
Push the metal clips down to fit inside the notches on the
cable plug.
N OTES :
• You only need to connect one of the cables mentioned above. Do
not use the parallel and the USB cables at the same time.
• If you are using a USB cable, you must be running Windows 98/
Me/2000/XP, or Linux.
• The parallel port may not be available depending on your
country.
If you want to use a network cable, plug one end of the
Ethernet cable (UTP cable with RJ.45 connector) into the
Ethernet network port on the machine and the other end of
the cable into a network LAN connection.
N OTE : You can configure the network parameters using the
control panel; see page B.5.
To the parallel port on your computer
To the network LAN connection