Sony CPD-120AS - Manual (Page 13)

13 GB
Vertical
Frequency
70 Hz
60 Hz
85 Hz
60 Hz
75 Hz
75 Hz
85 Hz
47 Hz (95 Hz interlace)
60 Hz
60 Hz
Preset and user modes
The Multiscan CPD-120AS/220AS display has factory preset modes for
the 10 most popular industry standards for true “plug and play”
capability.
For less common modes, its Digital Multiscan Technology will perform
all of the complex adjustments necessary to ensure a high quality picture
for any timing between 30 and 70 kHz.
✔
Note for Windows ® 95 users
Install the new model information of the Sony computer display from “Windows 95 Monitor
Information disk” into your PC. (To install the file, refer to the attached “About the Windows
95 Monitor Infomration Disk”.)
This display complies with “VESA DDC,” the standards of Plug & Play. If your PC/graphic board
complies with DDC, select “Plug & Play Display (VESA DDC)” or this display’s model name
(CPD-120AS/220AS) as “Display type” from “Control Panel” on Windows 95. Some PC/
graphic boards do not comply with DDC. Even if they comply with DDC, that may have some
problems on connecting this display. In this case, select this display’s model name (CPD-
120AS/220AS) as “Display type” on Windows 95.
Windows ® is a registered trademark of Microsoft Corporation in the United States and other
countries.
✔
Note on recommended horizontal timing conditions
Horizontal sync width should be more than 1.0 µsec.
Horizontal blanking width should be more than 3.6 µsec.
Continued to the next page ➔
Using Your Display
Using Your Display
Resolution
(dots
×
lines)
640
Ч
400
640
Ч
480
640
Ч
480
800
Ч
600
800
Ч
600
1024
Ч
768
1024
Ч
768
1152
Ч
864
1152
Ч
864
1280
Ч
1024
Horizontal
Frequency
31.5 kHz
31.5 kHz
43.3 kHz
37.9 kHz
46.9 kHz
60.0 kHz
68.7 kHz
44.8 kHz
54.8 kHz
64.0 kHz NO.
1
2
3
4
5
6
7
8
9
10