Samsung CLX-3175FW - Manual (Page 47)

Scanning_ 47
5. Press the left/right arrow until Local PC appears on the bottom line of
the display and press OK. If the machine connected to a network, select
Network PC and press OK.
6. From Scan Destination, press the left/right arrow until the application
program you want appears, then press OK.
Default setting is My Documents.
7. Press the left/right button until the setting you want appears then press
OK.
•
Resolution: Sets the image resolution.
• Scan Color: Sets the color mode.
• Scan Format: Sets the file format in which the image is to be saved.
• Scan Size: Sets the image size.
8. Scanning begins.
SCANNING BY A NETWORK CONNECTION
If you have connected your machine to a network and set up network
parameters correctly, you can scan and send images over the network.
Setting up an e-mail account
To scan and send an image as an email attachment, you need to set up
network parameters using SyncThru Web Service.
1. Enter your machine’s IP address as the URL in a browser and click
Go to access the web site of your machine.
2. Click Machine Settings and E-mail Setup.
3. Select IP Address or Host Name.
4. Enter the IP address in dotted decimal notation or as a host name.
5. Enter the server port number, from 1 to 65535.
The default port number is 25.
6. Check the box next to SMTP Requires Authentication to require
authentication.
7. Enter the SMTP server login name and password.
8. Click Apply.
Registering authorized users
1. Enter your machine’s IP address as the URL in a browser and click
Go to access the web site of your machine.
2. Click Machine Settings and User Authentication.
3. Click Add.
4. Select index number corresponding to the location for storing the
entry, from 1 to 50.
5. Enter user name, auth ID, password and e-mail address.
You need to enter the registered user ID and password in the
machine when you start scanning to email from the control panel.
6. Click Apply.
Scanning to Email
You can scan and send an image as an email attachment. You first need to
set up your email account in SyncThru Web Service. (See "Setting up an e-
mail account" on page 47.)
Before scanning, you can set the scan options for your scan job. (See
"Changing the settings for each scan job" on page 48.)
1. Make sure that your machine is connected to a network.
2. Place a single document face down on the document glass. OR load the
document(s) face up into the ADF.
For details about loading an original. (See "Loading originals" on
page 36.)
3. Press Scan/Email.
4. Press the left/right arrow until Scan to Email appears on the bottom line
of the display and press OK.
5. When From apprears on the top line of the display, enter the sender’s
email address and press OK.
6. When DestinationEmail appears on the top line of the display, enter the
recipient’s email address and press OK.
If you have set up Address Book, you can use a speed button or a speed
email or group email number to retrieve an address from memory. See
"Setting up Address Book" on page 48.)
7. To enter additional addresses, press OK when Yes appears and repeat
step 6.
To continue to the next step, press the left/right arrow to select No and
press OK.
8. If the display asks if you want to send the email to your account, press
the left/right arrow to select Yes or No and press OK.
9. Enter an email subject and press OK.
If you see Not Available message, check the port connection.
If you selected Network PC, select your registered user ID and
enter the PIN. Press OK.
•
ID is the same ID as the registered ID for Samsung Scan
Manager.
• PIN is the 4 digit number registered for Samsung Scan
Manager.
To add or delete the folder where the scanned file is saved, add or
delete the application program in Samsung Scan Manager>Set
Scan Button.
• Scan Format appears only when you selected the Scan
Destination to My Documents.
• If you want to scan from the default setting, press Color Start
or Black Start.
• Scanned image is saved in computer's My Documents> My
Pictures>Samsung folder.
• You can use Twain driver to scan quickly in Samsung Scan
Manager program.
• You can also scan by pressing Window's Start>Control
Panel> Samsung Scan Manager>Quick Scan.
If the authentication method of SMTP server is POP3 before
SMTP, check the box next to SMTP Requires POP3 Before
SMTP Authentication.
a. Enter the IP address in dotted decimal notation or as a host
name.
b. Enter the server port number, from 1 to 65535. The default
port number is 25.
If you registered Auth Id, Password and checked Enable Auth
User in User Authentication on SyncThru Web Service, My
Log in ID and Password appear. Enter in the Auth Id and
Password to your machine. Go to step 6.
This prompt does not appear if you have activated the Auto Send
To Self option in the email account setup.