Sanyo AVP-429 - Manual (Page 13)

Connecting the TV
Basic Connections
Connecting Satellite
Receiver
Connecting Digital
Satellite Receiver
Connect the satellite antenna cable to the satellite receivers SATELLITE IN jack.
Use AV cables to connect the satellite receivers AUDIO and VIDEO OUT jacks to
the TVs AUDIO and VIDEO IN jacks.
Connect the RF coaxial cable from the satellite dish to the input of the digital
satellite receiver.
Use a component video cable to connect the YPbPr jacks of your digital satellite
receiver to the TVs component jacks.
Component video connection is necessary to view digital broadcastings in 1080i,
720p, 480i and 480p. This TV displays most format types of picture.
The component Jacks do not provide audio, so audio cables must be connected
to provide sound.
Satellite Receiver
Satellite
antenna
cable
Cables are often color-coded to
connectors. Connect red to red,
white to white, etc.
AV cable
S-VIDEO
cable
If your is not equipped with S-VIDEO, use a VIDEO cable
(yellow) instead of the S-VIDEO cable.
satellite receiver
12
Component video cable
Audio cable
RF coaxial cable
Cables are often color-coded to
connectors. Connect red to red,
white to white, etc.
Digital Satellite Receiver
Bottom View
Bottom View