Sony ICD-B10 - Manual (Page 29)

Other Functions
29 GB
To stop the timer recording
Press xSTOP.
To change the timer setting
Press . or > in Step 2, 3 or 4 on page 28 to change the year, month,
day or time and press NxPLAY/STOP.
To cancel the timer recording setting
Select “OFF” in Steps 1-3 on page 27 and press NxPLAY/STOP.
Notes
• You cannot set the timer to record more than one message.
• When the timer recording starts, the recording mode selected in Step 5 is
automatically selected. When the recording ends, the recording mode is reset
to the initial setting.
• Make sure that the remaining recording time is long enough for the timer
recording. You cannot set the timer if the length of the timer recording exceeds
the remaining recording time. However, in the case of recording once a week
or everyday, you can set the timer if the remaining recording time is longer
than the first recording and for the second or later recording, timer recording
stops when there is no more remaining time on the IC recorder.
• If 99 messages have been recorded in the selected folder or the memory is full,
timer recording will not start.
• If the timer is set to start recording before 23:59 and to end recording after
0:00, the recording will stop the next day.
• If the timer start time comes during alarm playback, playback will stop and
the timer recording starts.
• When the timer recording start time comes during operation other than
recording, the operation stops and the timer recording starts.
When the timer recording start time comes during recording, the recording
continues and the timer recording will not start.